Banner Image

The 2027 Yeti LTe: Full Details & Specs

Built for faster.

The LTe, Yeti's full-power answer to going steep and fast. A Sixfinity-suspended enduro eMTB that doesn't back off from anything. The Sixfinity suspension comes straight off Yeti's E-EDR World Cup program.

Yeti pushed reach out 5mm per size over the 160e and slackened the head angle to mirror their World Cup enduro bike, chasing more stability at speed. A longer head tube raises the stack for a taller, more confident position, and a long wheelbase keeps the LTe on the line through rough terrain.

A suspension flip chip dials the leverage rate between 25%, 30%, and 35% progression, so you can go racy and consistent or plush with more bottom-out resistance. A geometry adjustment chip lets you swap between full 29" and a mixed 29"/27.5" setup without touching the rest of the geometry.

A Bosch motor gives up to 120Nm and 750 watts output. Every build ships with an 800Wh battery, with 600Wh compatibility and PowerMore Range Extender support (size M-XL) for riders chasing lighter weight or more range. Round it out with a downtube guard that doubles as a service door, a full-color toptube display, and a custom chainguide, and the LTe is built to climb hard and take the toughest lines at full speed.

Available Colors

2027 Yeti LTe in Turquoise

2027 Yeti LTe in Raw Gloss

Specifications

XX AXS TURQ

X0 AXS TURQ

90 TURQ

MSRP$15,500$13,500$10,900
FrameTURQ Series carbon, Sixfinity suspension, 148x12mm Boost, UDHTURQ Series carbon, Sixfinity suspension, 148x12mm Boost, UDHTURQ Series carbon, Sixfinity suspension, 148x12mm Boost, UDH
Weight23.72 kg (52.28 lb)23.46 kg (51.72 lb)23.59 kg (52 lb)
Travel160mm160mm160mm
ForkFox Podium Factory GRIP X2, 170mmFox Factory 38 GRIP X2, 170mmFox Factory 38 GRIP X2, 170mm
Rear ShockFox Factory Float X2Fox Factory Float X2Fox Factory Float X2
WheelsetDT Swiss HXC1700 30mmDT Swiss HXC1700 30mmDT Swiss H1900 30mm LN
Rear DerailleurSRAM XX AXSSRAM X0 AXSSRAM 90
ShifterSRAM AXS Pod ControllerSRAM AXS Pod ControllerSRAM 90
CrankRaceFace Era, 160mmSRAM X0, 155mmSRAM 90, 155mm
CassetteSRAM XX, 10-52SRAM X0, 10-52SRAM GX, 10-52
ChainSRAM XXSRAM X0SRAM GX
BrakesSRAM Maven UltimateSRAM Maven SilverSRAM Maven Base
RotorsSRAM HS2, 200/200SRAM HS2, 200/200SRAM Centerline, 200/200
Dropper PostSRAM Reverb AXS, 31.6mm - SM: 150mm, MD: 175mm, LG-XL: 200mmFox Transfer, 31.6mm - SM: 150mm, MD: 180mm, LG-XL: 210mmCrank Brothers Highline, 31.6mm - SM: 150mm, MD: 170mm, LG-XL: 200mm
Front TireSchwalbe Magic Mary Gravity Pro 2.5, Radial Ultra SoftSchwalbe Magic Mary Gravity Pro 2.5, Radial Ultra SoftSchwalbe Magic Mary Gravity Pro 2.5, Radial Ultra Soft
Rear TireSchwalbe Tacky Chan Gravity Pro 2.5, Radial SoftSchwalbe Tacky Chan Gravity Pro 2.5, Radial SoftSchwalbe Tacky Chan Gravity Pro 2.5, Radial Soft
HeadsetCane Creek 40Cane Creek 40Cane Creek 40
HandlebarYeti Carbon 35x800mm, 35mm riseYeti Carbon 35x800mm, 35mm riseBurgtec Ride Wide Alloy Enduro 35x780mm, 30mm rise
StemBurgtec Enduro MK3, 35x50mmBurgtec Enduro MK3, 35x50mmBurgtec Enduro MK3, 35x50mm
GripsODI ReflexODI ReflexODI Reflex
SeatWTB Solano SL TitaniumWTB Solano ChromolyWTB Solano Chromoly
Drive UnitBosch Performance Line CX-R, BDU384YBosch Performance Line CX-R, BDU384YBosch Performance Line CX, BDU384Y
DisplayBosch Kiox 400CBosch Kiox 400CBosch Kiox 400C
ChargerBosch 4A ChargerBosch 4A ChargerBosch 4A Charger
BatteryBosch PowerTube 800WhBosch PowerTube 800WhBosch PowerTube 800Wh
Assist SwitchBosch Wireless Mini RemoteBosch Wireless Mini RemoteBosch Wireless Mini Remote

Características destacadas de 2027 Yeti LTe

Sixfinity Suspension

The LTe runs Yeti's Sixfinity 6-bar linkage, the same suspension platform developed through the E-EDR World Cup program. It tunes acceleration response (anti-squat) and braking response (anti-rise) independently from the leverage curve, so pedaling stays efficient, braking stays predictable, and the suspension still moves freely over rough terrain.

Tunable Leverage Rate

A flip chip lets you choose between 25%, 30%, or 35% progression. Lower settings feel racier and more consistent through the stroke, the middle setting is balanced, and the highest setting feels plush early with more bottom-out resistance late in the travel.

MX or 29", You Choose

A flip chip switches the LTe between a full 29" wheel setup and a mixed 29" front / 27.5" rear setup. Geometry, ride characteristics, and leverage rate adjustability stay the same regardless of which wheel size you run.

Vectran Carbon Layup

The carbon fiber frame is reinforced with Vectran plies, a high-performance multifilament similar to Kevlar that adds impact resistance and overall strength without adding significant weight.

Frame Protection

A downtube guard protects against rock strikes and doubles as an access door, making battery swaps and service on the internally routed cables easier.

Range Extender Compatibility

The LTe is compatible with the aftermarket Bosch PowerMore Range Extender on MD-XL frames. The pack adds 250Wh of capacity using a 200mm cable.

Rattle-Free Cable Routing

Secure clamp closures and grommets at the frame's cable entry and exit points keep cables from rattling and keep grit out of the frame. The routing also supports 'moto' style brake setups.

Custom Chainguide

A proprietary chainguide mounts directly to the lower pivot bolt for a lightweight, clean setup without extra hardware.

Bosch Performance Line

The XX and X0 build kits run Bosch's Performance Line CX-R drive unit, a race-tuned version of the CX motor delivering 120Nm of torque and 750 watts in a lighter package. The 90 build uses the standard Performance Line CX unit.

Drive Unit Cooling

A custom-designed drive-unit guard increases airflow and venting to the motor for the best performance on long, hard climbs.

Fully Integrated Color Display

A full-color Bosch Kiox display is integrated into the top tube and shows battery level, available range, drive unit power, and rpm, with rider-feature access and ANT+/Bluetooth smartphone integration.

Acceleration Response (Anti-Squat Tuning)

Sixfinity is tuned to 101% anti-squat at sag, keeping pedaling efficient without a harsh suspension feel. As the Switch Link moves up through the travel, pedaling support increases where it's needed, with a higher anti-squat curve than a comparable full-power e-MTB.

Geometry Details by Size

SM MD LG XL
Seat Tube Length390420440460
Effective Top Tube Length566598620647
Head Tube Angle64°64°64°64°
Effective Seat Tube Angle78°78°78°78°
Actual Seat Tube Angle72.0°72.1°72.2°72.3°
Rear Center449449449449
Wheelbase1223125712821312
Estimated BB Height350350350350
Standover754765765765
Head Tube Length92100111122
Axle to Crown588588588588
Fork Offset44444444
Stack618625635645
Reach435465485510
Front Center774808833863
Vertical Fork Travel153153153153

Size Guide

Size Rider Height (cm) Rider Height (Imperial)
Small / SM 155cm – 170cm 5'1" – 5'7"
Medium / MD 165cm – 180cm 5'5" – 5'11"
Large / LG 178cm – 191cm 5'10" – 6'3"
X-Large / XL 185cm – 201cm 6'1" – 6'7"

Frequently Asked Questions

2027 Yeti LTe

Sixfinity is a 6-bar linkage suspension platform that allows for advanced tuning to adapt to pedaling, braking and various points in the suspension travel. It allows for similar behavior to the Switch Infinity link, but with less complexity.

Sixfinity’s lower Switch link first moves upward, and then switches directions and travels downward as the suspension moves from the extended to compressed states. As a result, Sixfinity resists bobbing when you're pedaling and moves much more freely through rough terrain.

Sixfinity allows for tuning braking response and leverage rate separately. On the trail, that means: efficient pedaling without an overly firm suspension feel; better traction and less wasted energy while accelerating and climbing; predictable support when braking hard; active suspension through repeated hits; and a leverage curve tailored to the bike model.

Viene con una garantía del fabricante de por vida.

Yes. The LTe is compatible with the aftermarket Bosch PowerMore Range Extender on MD-XL frames. The pack adds 250Wh of capacity and connects with a 200mm cable.

The XX and X0 build kits run Bosch's Performance Line CX-R drive unit, tuned for racing with 120Nm of torque and 750 watts. The 90 build uses the standard Performance Line CX unit at the same 120Nm/750W output.

Bikes ship with an 800Wh battery (3,941g) as standard, with 600Wh (3,049g) aftermarket compatibility for riders who want to save weight on shorter missions.

Yes. A flip chip lets you choose between 25%, 30%, or 35% progression. Lower settings feel racier and more consistent, the middle setting is balanced, and the highest setting feels plush early with more bottom-out resistance late in the travel.

Yes. A flip chip lets you swap between a 29" front wheel and a 27.5" rear wheel while fully retaining the bike's geometry, ride characteristics, and leverage rate adjustability.

Yeti increased reach by 5mm per size versus the 160e and slackened the head angle to mirror their World Cup enduro race bike, aimed at more stability at speed.

Complete bike weight is build-dependent: 23.72kg (52.28 lb) for the XX AXS TURQ, 23.46kg (51.72 lb) for the X0 AXS TURQ, and 23.59kg (52 lb) for the 90 TURQ, per Yeti's published spec sheet.

Shop Inventory

Itching to get a bike of your own? We have just the solution.