2026 Norco Range VLT CX C1
Carbon Frame + Bosch CX + Fox Factory Suspension
Shipped Fully Built
We ship bikes fully assembled in a very large bike box, so there’s very little setup required when it arrives. Bikes are set up in store by our expert mechanics prior to packaging for shipping.
How to Set Up Your Bike
Carefully open the box and remove the packaging. Install the front wheel and straighten the handlebar. You'll also need pedals unless you bought pedals with your bike. The suspension (if there is one) will be pre-tuned to your weight. You should be able to ride within a few minutes of opening the box.
Customize This Bike
Is there anything you want to change on this bike? We can customize the bike for you before shipping it out, just get in touch. That includes anything from basic changes like swapping out the handlebars or saddle, to complex makeovers like a drivetrain swap.
Not sure exactly what you need, or if it's worth it or even a good idea? Contact us and see what we think, we'll help you figure it out. We have deep experience working with and riding all the brands we sell, and we are here to help.
Customized bikes are non-refundable unless otherwise stated.
2026 Norco Range VLT CX C1
Key Features
- Wheel Size: MX
- Front Travel: 170mm
- Rear Travel: 160mm
- Frame Material: Carbon
Specs
- Carbon frame with 160mm rear travel
- UDH compatible frame
- Eagle Transmission compatible frame
- Norco Ride Aligned geometry
- VPS HP high-pivot suspension platform
- Rearward axle path designed for square-edge impact control
- Fox 38 Factory Float fork
- Grip X2 damper with HSC, LSC and LSR adjustment
- 170mm front suspension travel
- 44mm fork offset
- Fender included with fork
- Fox Factory Float X2 rear shock
- 205x65mm trunnion rear shock
- High-speed and low-speed compression adjustment
- High-speed and low-speed rebound adjustment
- 2-position rear shock adjuster
- Bosch Performance Line CX drive unit
- 100Nm motor torque
- 750W peak power
- Bosch PowerTube 800Wh battery
- Bosch BES3 drive system
- Shimano Deore XT SW-M8250-IR 12-speed electronic shifter
- Shimano Deore XT RD-M8250 SGS 12-speed electronic derailleur
- Shimano Deore XT CS-M8200 10-51T 12-speed cassette
- Shimano Deore XT CN-M8100 12-speed chain
- Praxis HD aluminum Bosch crankset
- 34T chainring
- 160mm crank arms
- Shimano XT M8220 4-piston brakes
- Shimano XT BL-M8200 brake levers
- Metallic brake pads
- Shimano RT-MT905 203mm front rotor
- Shimano RT-MT905 180mm rear rotor
- Norco 6061 DB alloy handlebar
- 800mm handlebar width
- 25mm handlebar rise
- Norco alloy stem
- 40mm stem length
- 35mm stem clamp
- TranzX YSI08 RAD+ travel adjust dropper post
- 31.6mm seatpost diameter
- 150mm dropper on S2
- 170mm dropper on S3
- 200mm dropper on S4 and S5
- FSA No.55 sealed bearing headset
- 1 1/8 inch to 1.8 inch tapered headset
- Fizik Terra Aidon X5 saddle
- WTB Wavelength 130mm grips
- Crankbrothers Synthesis Enduro front hub
- 15x110mm Boost front hub spacing
- Crankbrothers Synthesis Enduro rear hub
- 12x148mm Boost rear hub spacing
- Micro Spline freehub
- Crankbrothers Synthesis alloy rims
- 31.5mm front internal rim width
- 29.5mm rear internal rim width
- 29 inch front wheel
- 27.5 inch rear wheel
- Mixed-wheel MX setup
- Continental Kryptotal-F Enduro Soft 29x2.4 front tire
- Continental Kryptotal-R Enduro Soft 27.5x2.4 rear tire
- Sapim D-Light front spokes
- Sapim Race rear spokes
- No Other Way Limited Lifetime Warranty
Learn More About the 2026 Norco Range VLT CX C1
The 2026 Norco Range VLT CX C1 is built for riders who want full-power e-enduro speed without feeling like they are dragging a shuttle truck up the climb. This is the big-travel, Bosch-powered Range platform aimed squarely at steep trails, rough descents, repeated park laps, and rowdy backcountry lines where control matters as much as raw assistance. With 170mm of front travel, 160mm of rear travel, a mixed-wheel layout, and Norco’s VPS HP high-pivot suspension, the Range VLT CX C1 is made to stay calm when the trail gets loud.
The carbon frame gives this bike a clean, modern shape around the Bosch Performance Line CX drive unit and 800Wh PowerTube battery. The motor delivers up to 100Nm of torque and 750W of peak power, giving the Range VLT CX the punch to clean technical climbs, reset quickly between descents, and keep pushing deep into long rides. Norco’s Ride Aligned approach keeps the fit and handling focused, while the 29-inch front wheel and 27.5-inch rear wheel combine high-speed confidence with a rear end that is easier to place in tight, steep terrain.
The C1 build is the premium spec level for riders who expect the suspension and drivetrain to match the bike’s intentions. A Fox 38 Factory Float fork with Grip X2 damper leads the charge with high- and low-speed compression plus low-speed rebound adjustment, while the Fox Factory Float X2 shock adds four-way tuning and a two-position adjuster out back. Together, they give the Range VLT CX C1 the composure and adjustability needed for aggressive riders who are hitting square edges, compressions, braking bumps, and high-speed lines again and again.
Shimano’s Deore XT Di2 12-speed drivetrain keeps shifting precise under e-bike loads. The XT electronic shifter and derailleur pair with a wide-range 10-51T cassette, XT chain, and Praxis HD aluminum Bosch crankset with a 34T chainring. The result is clean, dependable gearing for winching up steep climbs and dropping into long descents without constantly thinking about the drivetrain. Shimano XT M8220 four-piston brakes handle stopping duties with metallic pads, a 203mm front rotor, and a 180mm rear rotor for the power and modulation an e-enduro bike needs.
The wheel and tire package is just as trail-focused. Crankbrothers Synthesis Enduro alloy wheels use front- and rear-specific rim widths to balance steering precision with rear-wheel durability, and Continental Kryptotal Enduro Soft tires bring serious grip in mixed conditions. The cockpit uses an 800mm Norco alloy handlebar, 40mm Norco stem, WTB Wavelength grips, Fizik Terra Aidon X5 saddle, and a size-specific TranzX RAD+ travel-adjust dropper post, giving each size a practical fit for aggressive descending.
Every major choice on the Range VLT CX C1 points toward the same goal: make the climbs possible, make the descents worth it, and keep the bike composed when the trail gets steep, fast, and technical. It is a full-power e-enduro machine for riders who want premium suspension, powerful braking, smart Bosch integration, and a build that is ready for serious terrain from day one.
Product Identifiers
- Manufacturer Part Number (MFPN/MPN): 0283415155
Product Identifiers
- Manufacturer Part Number (MFPN/MPN): 0283415156
Product Identifiers
- Manufacturer Part Number (MFPN/MPN): 0283415157
Product Identifiers
- Manufacturer Part Number (MFPN/MPN): 0283415158
See what our customers say about us on Google
At the end of the day, we’re mountain bikers. We spend our weekends on the dirt, chasing turns, and geeking out over gear. We sell the brands we ride and love, and we care about every build like it’s headed into our own garage. Our goal is simple: to make buying your bike such a good experience that when we see you out on the trail, it feels like seeing a friend.
Check out the latest gossip, ie Google reviews, below!
*Disclaimers
- Mountain bikes, road bikes, and gravel bikes are fully assembled prior to shipping. Del Sol, E11even, Haro, and Tuesday bikes will ship as received from the original manufacturer in the original manufacturer packaging. All other bikes including kids bikes, cruisers, bmx bikes, etc. may be shipped in the original manufacturers packaging.
- While every effort is made to ensure the accuracy of the above information, it is entered by real live humans and humans make mistakes. The majority of the bikes on our website are specced exactly as they come from the manufacturers. Any upgrades or customizations will be listed separately. Please confirm with Airpark Bike Co if there are any questions about the included specification for the bike you are looking at.
- Bike component specifications including (but not limited to) suspension, drivetrain, brakes, tires, and wheels are subject to change by the manufacturer without notice.
- Any indicated component upgrades included or purchased in conjunction with a bike will be replacements for OEM components on the bike. The bike will ship with the upgraded components installed, but will not include the OEM components. Credit for the OEM components are factored into the pricing for upgrades.
- Weights, where provided, are based on manufacturer estimates for the model and are not a guarantee. The actual delivered weight may vary between build kits or spec levels of the same product, as well as between sizes. It may also vary due to upgraded components, variation in amounts of lubricants and sealants, and other factors.
- The free gift card offer is only valid on full priced Santa Cruz bikes. This offer is not valid with any other discounts or offers. The gift card cannot be applied to the purchase of the bike. The gift card can be used on any future purchase of any products on this website. If the original order for the bike is cancelled, returned, refunded, or exchanged and the gift card value has not be utilized, then the gift card will be voided. If the original order for the bike is cancelled, returned, refunded, or exchanged and any amount of the gift card value has been utilized, the value of the gift card may be deducted from the refund amount for the bike purchase. This gift card value deduction is in addition to any restocking fees charged for the bike.
